409 Dive Log Australasia December 24

Customize Your S-Tek Backplate and Wing for Every Dive SCUBAPRO designed the S-Tek technical diving system with premium features and modularity in mind, allowing divers to customize the backplate and wing setup for the specific dive and equip-ment requirements. This interchangeability and attention to detail makes S Tek an excellent choice for technical and avid recreational divers . There are four areas where you can customize your S Tek backplate & wing kit: the backplate material, webbing configuration, weighting/trim, and wing lift capacity. S-Tek backplates are available in aluminum or steel to meet your weight and travel require-ments. Each shows the attention to detail that SCUBAPRO is known for. Webbing slots are carefully angled to reduce wear and increase comfort, a cut out on the top creates a handle for easily lifting the system with or without tank(s) attached, and recessed wingnut sockets keep the innovative S-Tek Ergo Nuts flush. The backplates are available in two webbing con figurations. The PURE version uses the Hogar-thian system of continuous webbing and minimalist features. The PRO version features TEK-LOC adjustable shoulder buckles to ensure a snug fit while making donning and doffing the system easy. This is ideal for those who want more comfort, want to switch between varying exposure protection thicknesses without re rig-ging the webbing and dive centers who will use the system as a rental with divers of all sizes. The PRO version is compatible with an array of Mon-prene® back, waist, and shoulder pads to provide cushioning without adding bulk or buoyancy.

There are several weighting and trim options available with the S-Tek system. Up to two trim weight kits can be added to either backplate supporting a maximum of 8lbs (2lbs per pocket). The S-Tek Pro Fluid Form Weight System can be added if you want a droppable integrated weight system on the waist strap. Finally, you can also keep weight off the system and use a traditional weight belt. There are three S-Tek donut wings available that can quickly be swapped out thanks to the S-Tek Ergo Nuts. These innovative knobs house traditional wingnuts, making them easy to strongly tighten even with thick gloves, while an o-ring creates friction so that the nuts remain tight. The 30lb and 40lb wings are used with the robust S-Tek Single Tank Adapter while the 60lb wing is designed for use with doubles. Each wing has a durable, rounded profile that allows for smooth and controlled air migration. S-Tek trim weight pockets are compatible with the 30lb and 40lb wings. All the configuration options make SCUBAPRO’s S Tek system the perfect platform for avid tech divers, new tech divers interested in slowly expanding their tech kit, and avid divers who might prefer a backplate and wing setup with the flexibility to customize the kit to their diving preferences. Learn more at your local SCUBAPRO dealer.

05

DIVE LOG Australasia #409 - December ‘24

www.divelog.net.au